1. Use awnings on windows and terraces, so that sunlight can be arrested and do not cause heat. Width awnings can be customized to the needs.
2. You can also expand the roof, so that the distance of the house and terrace walls to be far away. This is done when planning the house.
3. Can also be used bamboo curtain, so that sunlight is not easy to get into the house. Besides cheap bamboo blinds can be up-down as needed. Use of restraint such as awnings and sun blinds bamboo can also save on the use of AC in the room. Section, the use of AC in the room that much / often the sun will cause the room did not feel cold, so that a wasteful use of air conditioning.
Quoted from: tabloidnova.com

Incoming search terms:

• gordyn rumah minimalis (1)

Basically, there are two commonly used color lights in the house, which is yellow and white. However, the use of both color can not be applied in every room because that would cause different effects. Workspace is okay to use white lights, but for the bedroom can not. The lighting is too bright it will not bring the required effect in a cozy bedroom.

The primary function of lighting in the home is as enlightening. However, from the standpoint of interior design, lighting can also affect the effect of beauty and psychological conditions of the inhabitants. In addition, with the right lighting, you can enhance your existing interior elements at home. That is why, lighting the room is the most important element in a home.

Currently lighting coming from the lamp is set up in such a manner. To create an atmosphere of twilight, the lights can be made hidden or concealed so that visible light alone. This method is suitable to be applied in the bedroom. You can also control the large-small light generated by the lamp by using dimmer switches.

Election lights in the house must meet five conditions, including health, safety, ergonomics, or do not have a negative impact, beauty, and comfort. So, when you want to buy a lamp, not just the beauty factor is concerned. Lights you use should also be durable, energy efficient, environmentally friendly, and no heat when held to be safe if touched by children.

For placement, this time the lights can be placed anywhere, like in a wall, behind the ceiling, even on the floor. By placing an increasingly varied, the type of lighting would be increasingly diverse. Essentially, there are many ways to adjust lighting and cozy effect to your home.

Incoming search terms:

• rumah full house (40)
• warna cat rumah minimalis (18)
• small modern house plans (16)
• interior rumah minimalis (12)
• colour house (11)
• energy efficient house plans (2)
• energy efficient homes (1)

Landscape lighting is all about enhancing what’s in the external environment. Our landscape lighting blends unobtrusively into any surrounding, harmonizing your property with both nature and architecture. We humbly landscape lighting integrate into any surrounding, harmonizing your property with a good nature and architecture.

1). Planning The Low – Voltage Landscape System
Strategically locating the fixtures around a structure with pools of light in contrast with darker areas provides the interplay of light and shadow that creates stunning visual impact. Low voltage lighting is easily installed, making it ideal for enhancing existing properties.

2). Sketch the Property
The front sidewalk or driveway is a natural starting point. Sketch the structure (house or office building) in context of the lot, and make note of trees for uplighting, interesting textures, signs or address markers, colorful flowerbeds, and shrubbery.

3) Indicate Fixture Location
Once the sketch is complete, pencil in the placement of area, path, directional, and specialty fixtures.

a. Area lights are indirect light sources that have a large distribution of light on the ground or on the surface commonly used for driveways, isolated planters, or perimeter illumination.

b. Path lights are commonly used for small pathways, walkways, flowerbeds and ground cover areas, with spacing of 6 to 10 feet. With a narrow sidewalk, stagger the lighting from one side to the other; however, a uniform row of fixtures works well for a wide walkway or driveway.

c. Well lights are extremely effective for aiming light up a tree or column. They should be located 2 to 4 feet from the trunk base. Directional lights aim a beam directly at an object or surface. These fixtures can be hidden under shrubs or in other unobtrusive ways

d. Special fixtures are used for a wide variety of special installations and applications, including hanging, surface, and underwater, step, and brick lighting. It is usually more attractive when the lighting effects are spread throughout the setting rather than merely aimed for symmetrical distribution.

4) Selecting the Proper Transformer
When the system lamp wattage is known, the transformer calculation is easy. Just add up the total wattage of the lamps you are using and make sure it is less than or equal to the transformer rating. Try to leave extra space on the transformer for future expansion.